Info Menu (Display Only) - Epson EB-X14H User Manual

List of Functions
Submenu
Operation Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cable is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When set to On, this automatically stops
projection when no image signal is being input and no
operations are carried out.
Sleep Mode Timer: When Sleep Mode is set to On, you
can set the time before the projector automatically turns off
within a range of 1 to 30 minutes.
Lens Cover Timer: When set to On, this turns off the
power automatically 30 minutes after the A/V mute slide is
closed.
This is set to On by default.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
Standby Mode When set to Communication On, you can output analog
(EB-X14H/EB- RGB signals from the Computer1 port to an external
monitor even if the projector is in standby mode.
X11H/EB-S11H
only)
You can set the language for messages and menus.
Language
Reset You can reset the adjustment values for Display
*2
Operation
settings.
See the following to return all menu items to their default
settings.
s "Reset Menu"
*1 When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
s "Managing Users (Password Protect)"
*2 Except for High Altitude Mode.
Function
from the Extended menu to their default
p.63
p.48

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)"
*1
and
Submenu
Lamp Hours
Source
Input Signal
Resolution
Refresh Rate
p.27
Function
You can display the cumulative lamp operating time
When it reaches the lamp warning time, the characters are
displayed in yellow.
You can display the source name for the connected
equipment currently being projected.
You can display the content of Input Signal set in the
Signal menu according to the source.
You can display the resolution.
g
You can display the refresh rate
62
* .
.