Projecting Images
Switching to the Target Image by Remote Control
You can change directly to the target image by pressing the following
buttons on the remote control.
A
Each time the button is pressed, it cycles through the images being input
from the following sources.
• Computer1 port
• Computer2 port
B
Each time the button is pressed, it cycles through the images being input
from the following sources.
• S-Video port
• Video port
• HDMI port (EB-X15 only)
C
Changes to USB Display.
Remote control
Projecting with USB Display
You can use a USB cable to connect the projector to a computer to project
images from the computer.
You can send the computer's audio with the projected image.
System requirements
For Windows
Windows 2000
OS
Windows XP
Windows Vista
Windows 7
Mobile Pentium III 1.2 GHz or faster
CPU
Recommended: Pentium M 1.6 GHz or faster
256 MB or more
Amount of Memory
Recommended: 512 MB or more
20 MB or more
Hard Disk Space
*1
*2
Professional 32 bit
Home Edition 32 bit
Tablet PC Edition 32 bit
Ultimate 32 bit
Enterprise 32 bit
Business 32 bit
Home Premium 32 bit
Home Basic 32 bit
Ultimate 32/64 bit
Enterprise 32/64 bit
Professional 32/64 bit
Home Premium 32/64 bit
Home Basic 32 bit
Starter 32 bit
28