Control Panel - Epson EB-X14H User Manual

Part Names and Functions
Name
C
Front adjustable foot When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s "Adjusting the Image Position"
D
Pass a commercially available wire lock through here and
Security cable
installation point lock it in place.
s "Installing the wire lock"
Function
p.36
p.51

Control Panel

All of the features in this guide are explained using illustrations of EB-
X14H unless otherwise mentioned.
Name
A
[t] button Turns the projector power on or off.
s "From Installation to Projection"
B
Changes to the next input source that is sending an image.
[Source Search]
button
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
• When the Configuration menu or the Help screen is
C
[Enter] button
displayed, it accepts and enters the current selection and
[ ]
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer1 or Computer2 port, you can automatically
optimize Tracking, Sync., and Position.
12
Function
p.26
p.27