Extended Menu - Epson EB-X14H User Manual

List of Functions
Submenu
Test Pattern When the projector is set up, a test pattern is displayed so that you
can adjust the projection status without connecting equipment.
While the test pattern is displayed, zoom, focus adjustments, and
keystone correction can be performed. To cancel the test pattern,
press the [Esc] button on the remote control or the control panel.
Attention
If a pattern is displayed for a long time, a residual
image may be visible in projected images.
You can reset all adjustment values on the Settings menu to their
Reset
default settings, except for Zoom (EB-S11H only) and User
Button.
See the following to return all menu items to their default
settings.
s "Reset Menu"

Extended Menu

Function
p.63
Submenu
Display You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
to Black, Blue, or Logo when no image signal is available.
*1
Startup Screen
when projection starts.
A/V Mute *1 : You can set the screen displayed when the
remote control's [A/V Mute] button is pressed to Black,
Blue, or Logo.
*1 You can change the user's logo that is displayed as a
User's Logo
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo"
Projection Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
s "Installation Methods"
Function
*1 : You can set the screen background
: Set to On to display the User's Logo
p.46
p.18
61