Adjusting The Image Size; Adjusting The Image Position - Epson EB-X14H User Manual

Adjusting Projected Images
a
If the [Esc] button is held down for about two seconds while
the corner selection screen from step 4 is displayed, the
following screen is displayed.
Reset Quick Corner: Resets the result of Quick Corner
corrections.
Switch to H/V-Keystone: Switches the correction method to
H/V-Keystone.
s "Settings Menu"

Adjusting the Image Size

EB-X15/EB-X14H/EB-X11H
Turn the zoom ring to adjust the size of the projected image.
EB-S11H
Adjust by using the [Wide]/[Tele] buttons on the control panel.
Wide: Enlarges the size of the projected image.
Tele: Reduces the size of the projected image.
p.60
EB-X15/EB-X14H/EB-X11H
EB-S11H

Adjusting the Image Position

Press the foot adjust lever to extend and retract the front adjustable foot.
You can adjust the position of the image by tilting the projector up to 12
degrees.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
36