Common Problem Resolution; Loose Connections; Service Notifications - HP ProLiant MicroServer User Manual

Exit any applications.
a.
Exit the operating system.
b.
Power down the server (on page 6).
c.
Disconnect any peripheral devices not required for testing (any devices not necessary to power up the
5.
server). Do not disconnect the printer if you want to use it to print error messages.
For more information, see the DIMM handling guidelines and the hard drive guidelines.

Common problem resolution

Loose connections (on page 41)
Service notifications (on page 41)
Firmware updates (on page 41)
DIMM handling guidelines (on page 42)
Hard drive guidelines
SATA hard drive LED (on page 42)

Loose connections

Action:
•
Be sure all power cords are securely connected.
•
Be sure all cables are properly aligned and securely connected for all external and internal
components.
•
Remove and check all data and power cables for damage. Be sure no cables have bent pins or
damaged connectors.
•
If a fixed cable tray is available for the server, be sure the cords and cables connected to the server are
routed correctly through the tray.
•
Be sure each device is properly seated. Avoid bending or flexing circuit boards when reseating
components.
•
If a device has latches, be sure they are completely closed and locked.
•
Check any interlock or interconnect LEDs that may indicate a component is not connected properly.
•
If problems continue to occur, remove and reinstall each device, checking the connectors and sockets
for bent pins or other damage.
•
For HP ProLiant BL c-Class Server Blades, be sure the OA tray is seated properly.

Service notifications

To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport). Select
the appropriate server model, and then click the Troubleshoot a Problem link on the product page.
Firmware updates
Download firmware updates from the following locations:
("SATA hard drive guidelines" on page 42)
Troubleshooting 41