50
Component Testing Procedures
8. Push Buttons / Dry Time & Temp. Selectors
ON/OFF Button Test Points are on the ON/OFF Switch located behind the button. Push Buttons, Dry Time, and Water
Temp. Selector Test Points are located on the CNC Connector on the Module Board (See "Connector Locations on the
Module Board").
Fault Codes: F08="ON/OFF" Switch
ON/OFF Button
ON/OFF Switch (Out)
ON/OFF Switch (Out)
ON/OFF Switch (Out)
ON/OFF Switch (Out)
ON/OFF Switch (Out)
ON/OFF Switch (Out)
ON/OFF Switch (In)
ON/OFF Switch (In)
ON/OFF Switch (In)
ON/OFF Switch (In)
ON/OFF Switch (In)
ON/OFF Switch (In)
ON/OFF Switch
Test Points
1 to 3
1 to 5
3 to 5
2 to 4
2 to 6
4 to 6
1 to 3
1 to 5
3 to 5
2 to 4
2 to 6
4 to 6
Reading
INFINITY (OL)
INFINITY (OL)
0 ohms
INFINITY (OL)
INFINITY (OL)
0 ohms
0 ohms
INFINITY (OL)
INFINITY (OL)
0 ohms
INFINITY (OL)
INFINITY (OL)