Before Starting A Cycle; Determining Load Sizes; Setting A 'Wash', 'Dry' Or 'Wash-To-Dry' Cycle - Splendide WD2100XC Instructions For Use Manual

Before starting a cycle

Always make sure,
•
the drum is loaded correctly (see below)
•
the door is closed
•
the ON-OFF button has been pressed and machine
power is ON
•
laundry aids have been added to the Dispenser
Drawer (see below)
IMPORTANT: DO NOT attempt to open the
door when the 'Door Lock' LED (D) is LIT SOLID!
Bleach
(with bin)
Prewash
Detergent 1 to 2 TBSP
(without Powder
Detergent
bin)
(or liquid
equiv.)

Determining load sizes

Maximum WASH CYCLE capacity - Cottons: 15
lbs, Synthetics: 9 lbs, Delicates: 8 lbs, Wools: 3 lbs
Maximum DRY CYCLE capacity - 8 to 11 lbs.
Always allow space for air to flow around the
clothes when drying. In general, if your drying,
don't fill the drum more than 1/2 to 3/4 full.
Setting a wash-to-dry cycle
1) Select the wash cycle
•
•
•
2) Select the dry time
•
3) Press the START button. When the wash cycle
1 to 2 TBSP
Liquid
Fabric
Softener
Setting a wash cycle
1) Select the wash cycle (See above);
2) Select the dry time
•
3) Press the START button. When the wash cycle
Setting a dry cycle
1) Select the dry cycle
•
2) Select the dry time
•
3) Press the START button. When the dry cycle
select a washing cycle using the
select the wash water temperature using the
WASH TEMP knob;
press available OPTION buttons (optional);
select the length of drying time with the DRY
TIME knob; (NOTE: Average loads will dry in 60
to 80 minutes)
ends, the appropriate dry cycle will start
automatically
set the DRY TIME knob to 'OFF';
ends, the machine will stop.
set the Cycle Selector to position 5, 10, or 13;
select the length of drying time using the DRY
TIME knob (20 to 180 min.);
ends, the machine will stop.
Washing and drying
Cycle Selector;
17