Splendide WD2000S Training Manual page 17

Install Dryer Ducting WD2100/WD2000S
These models must be vented to the outside. Proper routing
of the dryer ducting increases drying effi ciency and prevents
safety hazards.
1. The rigid or fl ex/metal duct-
ing should slope downward
and away from the machine.
After determining the
shortest, straightest duct-
ing route, cut a 4" diameter
hole through the wall to the
outside.
2. Follow the manufacturers
instructions to install a louvered vent or fl ap and tailpiece
(sold separately) to the wall.
3. Use duct tape or screw
clamps to secure the duct-
ing to the tailpiece and
to the vent fl ange on the
back of the machine.
!
WARNING
ELECTRICAL SHOCK HAZARD
Plug washer-dryer into a
grounded 3 prong outlet.
Do not remove ground prong.
Do not use adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
Splendide VI-422 Vent Kit
Vent
Flange
Complete the Installation
• Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. (See "Electrical Requirements. " )
• Check to be sure all parts are now installed. If there's an extra
part, go back through the steps to see which step was skipped.
• Check to be sure you have all your tools.
• Dispose/recycle all packaging materials.
• Check to be sure all water faucets are on.
• Check for leaks around faucets and inlet hoses.
• Plug into a grounded 3-prong outlet.
• Slide the washer-dryer to it's fi nal location and confi rm that it's
level.
• Read "Use & Care Manual"
To test and clean the washer, measure 1 to 2 tbsp. of powdered
High Effi ciency (HE) detergent.
• Pour the detergent into the
dispenser.
• Select EXPRESS in the COTTON
HEAVY DUTY CYCLE.
• Then press ON. Allow the
washer to complete one full
cycle.
Installation Information
Splendide All-Natural Premium
HE Laundry Powder, Part No.
1005 - Available from Splendide
11