Important General Safety Information - Splendide WD2000S Training Manual

Important safety messages can be found in this manual and on
the appliance. Always read and obey all safety messages.
This is a safety alert symbol. This symbol
alerts you to potential hazards that can kill or
!
hurt you and others. All safety messages will
follow the safety alert symbol and the word
"WARNING. "
The safety messages will tell you what the potential hazard is,
tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
!
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death
or electrical shock.
!
WARNING
EXCESSIVE WEIGHT HAZARD
Use two or more people to move
and install the washer-dryer.
Failure to do so can result in back
or other injury
4
General Information

IMPORTANT General Safety Information

Your safety is important. Read this section before you continue.
!
WARNING
ELECTRICAL SHOCK HAZARD
Plug washer-dryer into a
grounded 3 prong outlet.
Do not remove ground prong.
Do not use adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
Electrostatic Discharge (ESD)
Sensitive Electronics
ESD problems are present everywhere. ESD may damage or
weaken the electronic control assembly. The new control assembly
may appear to work well after repair is fi nished, but failure may
occur at a later date due to ESD stress.
• Use an antistatic wrist strap. Connect the wrist strap to a green
ground connection point or unpainted metal in the appliance;
or touch your fi nger repeatedly to a green ground connection
point or unpainted metal in the appliance.
• Avoid touching electronic parts or terminal contacts. Handle
the Module Board by the plastic housing ONLY.