3. Pressure Switch Test
Pressure Switch Test Points are located on both the CNI Connector and on the Pressure Switch. The CNI Connector is
on the Module Board (See "Connector Locations on the Module Board"). The Pressure Switch can be accessed once
the top is removed (See "Component Access Locations").
Fault Codes: F04, F05, F10, F14
Water Level Empty
Water Level Full
Water Level Overfull
CNI to Switch
CNI to Switch
CNI to Switch
Test Points
11 to 12
11 to 14
11 to 16
Test Points
1 to 16
2 to 14
3 to 12
Component Testing Procedures
Reading
0 ohms
0 ohms
0 ohms
Reading
0 ohms
0 ohms
0 ohms
45