Remote Control - DirecTV HD DVR Receivers User Manual

REMOTE CONTROL

Select "Remote Control" to display the Remote Control setup
screen. Then select from the Program Remote, IR/RF Setup,
Receiver Mode and Advanced Setups options.
When the MODE switch on your remote is in the left-most
position, it controls your DIRECTV Receiver. However, you can
also program the AV1, AV2 and TV positions to control other
equipment such as your TV, DVD, VCR or Stereo.
Program Remote
Follow the step-by-step instructions to set your remote to
control your TV or other A/V equipment, such as a DVD player
or surround sound system. For best results, it is helpful to
know the model number and brand of your equipment. To clear
current AV1, AV2 and TV settings, select "Program Remote" and
then "Reset Remote".
IR/RF Setup
Certain remote control models feature RF (radio frequency)
capability. Refer to the model number printed on the top left
corner of your DIRECTV Remote Control. Look for the letter(s) "R"
or "RB" at the end of the model number which indicates that the
remote supports radio frequency.
NOTE: Not all DIRECTV Receivers are RF-capable.
SETTINGS
77 77