Chapter 5 - Other Information; Programming Your Remote Control - DirecTV D10 User Manual

Other Information

Programming Your Remote Control

You can program the DIRECTV remote control to operate your TV power, volume and
mute, additional equipment such as a DVD, VCR, stereo, or a second TV or DIRECTV
Receiver.
1) Press the MENU key to display the Quick Menu.
2) Highlight Settings and press SELECT.
3) Highlight Setup and press SELECT.
4) SELECT the Remote item from the legt menu.
5) Follow the on-screen instructions to program your remote for your TV or additional
equipment (AV1 and AV2).
Once your remote is programmed to work with your TV, the VOL and MUTE key will work
regardless of the slide switch position. If you would like to change the VOL and MUTE
to work with another component, you can. Simply set up your remote to work with the
component, and then move the slide switch to the position you would like to lock the VOL
and MUTE keys to. Point the remote away from your DIRECTV Receiver and press and
hold MUTE and SELECT until the light near the slide switch blinks twice (about 5 seconds).
Enter 9-3-3. The light will blink twice, indicating the VOL and MUTE are now locked to the
chosen component, no matter what position the slide switch is in.
58
Programming Your Remote Control