Getting Started
20
20
Programming Your Remote Control
Programming Your Remote Control
Programming a TV
1.
Turn on the device. Slide mode switch to TV.
2. Search the 5 digit Remote Control Setup Codes list on page 59 of this manual for your TV and
write down the 5 digit number that worked for your TV as a reference
here:
3. Press and hold SELECT + MUTE for a few seconds until the LED blinks twice.
4. Aim the remote at the device and press PWR. The device should turn off.
If it does not, repeat steps 3 to 4, trying each code for your brand until you find one that works.
5. If the device turns off, press SELECT to lock the code.