Olivetti d-COLOR P2021 Operation Manual page 83

Job Box
>Quick Copy
?Harold
>Quick Copy
?Arlen
>Arlen
?Report
(User Name) (Data Name) (Selecting the data)
(Data Name) Copies (number of copies) (Number of copies / deleted)
• Printing a Private Print/Stored Job
Private/Stored (User Name) (Selecting the User)
(User Name) (Data Name) (Selecting the data)
(Data Name) ID (number of copies) (Input passwords)
(Data Name) Copies (number of copies) (Number of copies / deleted)
• Job Box Configuration (Job Box Configuration)
1
Press [MENU].
2
Press or
>
Note that menus shown in the list may vary depending on which optional
units installed in the printer.
Quick Copy (Using Quick Copy)
This mode enables you to print the requested number of copies of a job,
simultaneously storing the job on the hard disk. When additional copies
are required, you can reprint the required number of copies from the
printer operation panel. To print a job as a quick copy job, refer to Printing
System Driver User Guide.
The default number of print jobs that can be stored on the hard disk is 32.
This value can be increased to up to 50 from the Job Box Configuration
menu. For details, refer to Changing the Maximum Number of Quick
Copy on page 4-27. When the number of jobs reaches the limit, the oldest
job will be overwritten by the new one.
When the printer is turned off, all stored jobs will be deleted.
Note Refer to the Printing System Driver User Guide for the
driver settings.
Printing Additional Copies using Quick Copy
1
Press while Job Box > is displayed.
2
Press or
entered in the printing system driver (Harold, in this example) also
appears.
3
Press [OK]. A blinking question mark (?) appears before the user
name.
4
Press or
example.
5
Press [OK]. The job name entered in the printing system driver
(Report, in this example) appear with a blinking question mark (?)
before the letters.
4-23
repeatedly until Job Box > appears.
repeatedly until >Quick Copy appears. The name
to display the desired user name, Arlen, in this
Using the Operation Panel