Configuration (Standalone); Automatic Mode; Color Temperature Preset; Custom Static Color - Chauvet SlimPAR Pro VW User Manual

Configuration
(Standalone)

Automatic Mode

Color
Temperature
Preset
Custom Static
Color

Dimming Curve

Page 14 of 18
Set the product in one of the standalone modes to control without a DMX controller.
·
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (Static or
Automatic) to a DMX string connected to a DMX controller. Products in standalone
mode may transmit DMX signals that could interfere with the DMX signals from
the controller.
To enable the Automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired auto program, P--1–P--5.
4. Press <ENTER> and S00–S100 shows on the display.
5. Use <UP> or <DOWN> to select the auto program speed
S000–S100 (fast to slow).
6. Press <ENTER>.
Preprogrammed, static color temperature presets may be triggered without a controller,
as follows.
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired color temperature:
·
C-01 - White 1, 2800 K
·
C-02 - White 2, 3000 K
·
C-03 - White 3, 3300 K
·
C-04 - White 4, 3600 K
·
C-05 - White 5, 4000 K
·
C-06 - White 6, 4500 K
·
C-07 - White 7, 5600 K
·
C-08 - White 8, 6000 K
·
C-09 - White 9, 6300 K
4. Press <ENTER>.
To combine warm and cool white to create a custom, static color temperature mix, follow
the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and AXXX (warm white), WXXX (cool white), or SXXX (strobe)
show on the display.
3. Use <UP> or <DOWN> to select the desired option and press <ENTER>.
·
Use <UP> or <DOWN> to select the desired warm white color,
A000–A255 (0–100%).
·
Use <UP> or <DOWN> to select the desired cool white color
W000–W255 (0–100%).
·
Use <UP> or <DOWN> to select the desired strobe speed
S000–S020 (0–20 Hz).
4. Press <ENTER> to set selection and to go to the next option.
To combine warm and cool white to create a custom, static color temperature mix, follow
the instructions below:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select dIM1–dIM3 (small to large) or OFF(linear output).
4. Press <ENTER>.
SlimPAR™ Pro VW User Manual Rev. 6