Preset Functions And Operations - Denon DN-T625 Operating Instructions Manual

ENGLISH

PRESET FUNCTIONS AND OPERATIONS

21
(1) List of Preset Functions
• Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent
memory, so they are not cleared even when the power is turned off.
• The functions shown on the table below can be preset. Set the functions according to the usage purpose to
efficiently achieve even higher quality playback.
• One of the preset functions can be used to display information on this set (microprocessor version).
Preset function type
Preset type Selection of preset type.
Program 1 Setting of whether or not to play program 1.
Program 2 Setting of whether or not to play program 2.
Program 3 Setting of whether or not to play program 3.
Power on mode Setting of operation when power is turned on.
Time mode Setting of time mode when power is turned on.
Random Setting of random mode when power is turned on.
Finish mode Setting of operation when playback ends.
Setting of whether or not to standby at the next track
Next track standby
when the CUE button is pressed during playback.
Setting of operation when select knob is turned during
Next Track Reserve
playback.
Selection of whether or not to inhibit the panel switches
Play lock
during playback.
Panel lock Selection of whether or not to enable the panel buttons.
Setting of whether or not to perform the auto cue
Auto cue
operation and the audio startup level.
Play speed Standard playing speed setting.
Text display Selection of time or text display.
Frame display Selection of whether or not to display frames.
Setting of whether or not to display the EOM and display
E.O.M.
time setting.
Setting of whether or not to automatically stop the servo
Auto stop
functions.
18
Set upon shipment
Description
from factory
Preset Type 1
Program 1 OFF
Program 2 OFF
Program 3 OFF
Power On Stop
Time = ELAPSED
Random OFF
Finish Stop
Next Stb. OFF
Reserve. OFF
Play Lock OFF
Panel OFF
CueDet. –48 dB
Normal Speed
Text OFF
FR Disp ON
E.O.M. 10 s
Sleep 30 min
Preset function type
RC cord RC cord setting.
IR remote Infrared remote control sensor setting.
Serial remote Serial remote (9P D-Sub) setting.
Selection of whether or not to accept parallel remote
Parallel remote
signals.
Parallel remote Fader start mode selection.
Relay (loop) cycle Number of cycles for the relay mode.
No.
Setting for clearing presets and setting them to the initial
Preset clear
1
values.
2
Set information Microprocessor version display.
3
Play list (MP3) Setting of whether or not to preform the play list.
4
5
(2) Presetting procedure
6
) button u while presetting the TITLE button !0 .
1 Press the stop (
7 2
2 Turn the select knob !2 and select the preset item.
8
3 Press the select knob !2 to change the setting.
4 The preset mode is canceled when the stop (
9
time.
10
11
12
13
14
15
16
17
18
Set upon shipment
Description
from factory
RC DENON
IR ON
RS 232C
Remote ENA
Fader Pause
Loop 5
Ini. Preset
Ver. **** (* = number)
Play List OFF
) button u on CD is pressed. The setting are writeen at this
2
No.
19
20
21
22
23
24
25
26
27