Exit Setup - Alienware Area-51m 766 User Manual

■ chapter 2 bios setup and security feature
Note:
The Suspend Mode selection in BIOS only applies to older Windows version
(such as Windows 3.1 or Windows 95 or NT4) or non-Windows operating system. In
Windows ME / 98SE / 2000 / XP, suspend mode and settings are determined by
settings in the Power Options Properties (Start > Control Panel > Power Options).

Exit Setup

Item
Selections /
Sub-menu
N/A
Saves
Changes and
Exit
N/A
Discard
Changes and
Exit
Discard N/A
Changes
N/A
Load Optimal
Defaults
Description
After you have completed the BIOS
settings, select this item to save all
settings, exit BIOS Setup utility, and
reboot. New system settings will take
effect on next power-up.
Select this item if you intend to exit the
BIOS Setup utility without making any
changes to the current settings.
Discards changes done so far to any of
the setup questions.
Load Optimal Default value for all the
setup questions. F9 key can be used for
this operation.
2-9