Alienware Area-51m 766 User Manual page 67

■ chapter 4 upgrading your computer
Me tal C over
6. Remove 3 Screw A's and remove the DIMM Metal Cover.
The DIMM socket is now seen as shown below.
7. If you need to remove an old DIMM from the socket,
press out on the latches located on both edges of the socket at
the same time. The DIMM should pop up to an angle of 30
degree (see diagram below.). Pull the DIMM module out of the
memory socket. Store away the DIMM for the future use.
Metal C over
Screw A x3
DIMM Socket x2
4-7