Exit Setup - Alienware Area-51 m5500 User Manual

Note:
If you select Realtek Boot Agent, the system will attempt to boot from the
network.
Note:
When the BIOS performs POST, you may also press the F12 Key to enable the
Boot Device selection menu. You may choose CD/DVD, Hard Drive, or Realtek Boot
Agent as the first storage device to boot from. If you have already connected a USB
floppy disk drive before powering up, it will appear as a Removable Device in the Boot
Device selection menu

Exit Setup

Item
Saves
Changes and
Exit
Discard
Changes and
Exit
Discard
Changes
Load Optimal
Defaults
2-8
chapter 2 bios setup and security feature
Selections / Description
Sub-menu
N/A After you have completed the BIOS
settings, select this item to save all
settings, exit the BIOS Setup utility, and
reboot. New system settings will take
effect on the next power-up. The F10 key
can be used for this operation.
N/A Discards changes done so far to any of the
setup questions and exit.
N/A Discards changes done so far to any of the
setup questions.
N/A Loads the optimal default value for all the
setup questions. The F9 key can be used
for this operation.