Table of Contents
Advertisement
Installing a memory module (DIMM) into the system
To install the DIMM, do the following:
1.
Power OFF the notebook. Unplug the AC cord and all
cables/devices attached to the notebook.
2.
Place your hand on a large metal object momentarily to
discharge any static electricity. Place the notebook on a flat
surface and fully open the LCD lid.
3.
Find the keyboard latches near the upper edge of the
keyboard.
4.
The latch is spring-loaded. It will retract when pressed
and revert back to its original position when released. Using a
small blade to press the latch inward. The keyboard tray should
pop up slightly over the latch. If the keyboard tray does not pop
up, try to gently lift it up just over the latch. Repeat the step for
the other keyboard latches.
5.
Carefully lift up the bottom edge and position the
keyboard out of the way and the following is revealed.
4-6
■ chapter 4 upgrading your computer
Latch A
Latch A
- Quick Links:
- Performance Features
- Front View
- Keyboard Features
Hide quick links:
Advertisement
Table of Contents
