Toyota Sienna 2001 Operating Manual page 50

CAUTION
To avoid serious injury:
D
Do not set up the seatback table
while the vehicle is moving.
D
Do not sit on the folded seatback.
D
Make sure the second seat is se-
curely locked in sliding position
when you set the second seat as a
temporary table.
D
When the second seat for a table
was slid for accessing to the third
seat, get the seatback up to the
upright position, fold the seatback
down again, and make certain all
the latches are engaged.
NOTICE
To prevent the seat from damaging,
avoid putting heavy loads on the tem-
porary table.
50
01 SIENNA_U (L/O0008)
—Removing second seat
(bench seat)
1. Lift the seatback angle adjusting le-
ver (1) or press the lever (2) behind
the seatback and fold the seatback
down.
2001 MY SIENNA (OM45406U)
2. Pull the seat lock release lever. Lift
the seat and remove the seat toward
you.
Removing the second seat will enlarge the
luggage compartment. See "Luggage stow-
age precautions" in Section 2 for precau-
tions in loading luggage.