Toyota Sienna 2001 Operating Manual page 189

Defrosting
The outside of the windshield
For best results, set controls to:
Fan speed—Any setting except "OFF"
Temperature—Towards WARM
(red zone)
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Turning the air flow selector to the wind-
shield or floor/windshield position turns on
the defrosting function with the purpose of
clearing the front view.
When turning the air flow selector to wind-
shield or floor/windshield position, the air
intake selects FRESH automatically. This
is to clean up the front view more quickly.
If you want to return the setting to
RECIRCULATE mode, press the air intake
selector button once again.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears the
front view more quickly.
D
To heat the vehicle interior while de-
frosting the windshield, choose
floor/windshield air flow.
01 SIENNA_U (L/O0008)
2001 MY SIENNA (OM45406U)
189