When the garage door opener transmitter
is properly installed, you can operate the
transmitter by pushing the center panel of
the cover.
210
01 SIENNA_U (L/O0008)
If the center panel does not contact with
your garage door opener transmitter:
D
Check to see if spacer is on correct
pin.
D
Attach another spacer to the top of
original spacer. Check operation. If re-
quired, continue add spacers until con-
tact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
2001 MY SIENNA (OM45406U)
CAUTION
D
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the garage door
opener box closed while driving.
D
Keep the remained spacers away
from children.