Toyota Sienna 2001 Operating Manual page 258

Then secure the tire by repeating the
above removal steps in reverse order to
prevent it from flying forward during a
collision or sudden braking.
Make sure to pull the tire straight up with-
out catching on any other part.
Do not overtighten the bolt. Stop turning
it when you begin to feel resistance on
your hand.
After storing the tire, make sure it is se-
curely locked by pushing it forward and
rearward.
NOTICE
_ To secure spare tire clamp bolt:
Do not use impact wrench, but
wheel nut wrench.
_ Tighten the spare tire clamp bolt to
hold the spare wheel carrier by the
hook securely.
258
01 SIENNA_U (L/O0008)
—Blocking the wheel
2. Block the wheel diagonally opposite
the flat tire to keep the vehicle from
rolling when it is jacked up.
When blocking the wheel, place a wheel
block from the front for the front wheels
or from the rear for the rear wheels.
2001 MY SIENNA (OM45406U)
—Removing wheel ornament
Steel wheels
Aluminium wheels