Toyota Sienna 2001 Operating Manual page 113

Type A
01 SIENNA_U (L/O0008)
Type B
2001 MY SIENNA (OM45406U)
CHILD RESTRAINT SYSTEM
INSTALLATION
Type A—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages in the seat cushion.
2. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.
Type B—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages in the seat cushion.
2. Latch the buckles onto the anchor-
ages.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" in this section.)
For the installation details, refer to the
instruction manual equipped with each
product.
the
the
113