Controller Specifications; Software Specifications - Canon LBP3460 User Manual

Controller Specifications
CPU
Memory (RAM)
capacity
Host interface
User interface
RAM slot
ROM slot
Expansion slot
Software Specifications
Command language
Built-in fonts
8
Printable area
8-34 Specifications
R4000-333MHz*
* The upper limit of the frequency range
Standard 64 MB
Expandable up to 320 MB by installing an optional expansion
RAM module
USB 2.0 Hi-Speed/USB Full-Speed (USB1.1 equivalent) X 1
LAN connector (10BASE-T/100BASE-TX) X 1
LCD 16 characters X 1 line
8 LED indicators
8 Operation keys
1
1
1
PCL5e, PCL6, UFR II
PCL: 80 Scalable fonts, 10 Bitmap fonts
PCL5e, PCL6
Data cannot be printed within a 4.23 mm (10 mm for
envelopes) margin on all sides of the paper.
UFR II
Data cannot be printed within a 5 mm (10 mm for
envelopes) margin on all sides of the paper.
* If you have selected the [Print with Upper Left of Sheet as
Starting Point] check box in the [Finishing Details] dialog
box in the printer driver, you can extend the printable area
to near the edges of the paper. However, the data may be
printed with the edges missing when a document with no
margins is printed, even if the [Print with Upper Left of
Sheet as Starting Point] check box is selected. In this
case, specify the scaling factor in the driver to print
smaller so that any data on the document will not miss,
and then print again.