Quality Change - Canon LBP3460 User Manual

QUALITY CHANGE

CONT.PRINTING*, STOP PRINTING
Specifies whether the printer should continue printing with the image quality level
being lowered automatically or stop printing, displaying the following error
message when the memory required for the process runs out.
Error Message
<38 LOW IMGE QLTY>
If CONT.PRINTING is specified, the printer prints with the image quality level
being lowered automatically without displaying a message.
If STOP PRINTING is specified, the printer stops printing, displaying a message.
In this case, the printer resumes printing with the image quality level being
lowered by pressing [Online].
NOTE
•
When the message <38 LOW IMGE QLTY> appears frequently by specifying
STOP PRINTING for this item, perform the following procedure.
1. If GRADATION LEVEL is set to HIGH, set it to STANDARD. If you do so,
however, the printer prints with the gradation level of the data being lowered.
2. When the message still appears after applying the Remedy 1, or when you
want to print with the gradation level of the data as it is, install an optional
expansion memory module (RAM).
•
If STOP PRINTING is specified for this option, the printer sometimes stops printing,
displaying the message <26 SYS.MEM.FULL> depending on the type of the
received data when the memory required for the process runs out. In this case, you
can clear the error by pressing [Online]. However, the data may not be printed
properly.
Setting
When the printer receives a large amount of data or
complicated data, the memory required for the
process may run out, and the printer may print with
the image quality level being lowered automatically.
Specify whether the printer should display an error
message when the printer is in this status.
SETUP Menu Settings
5
5-29