Interface Menu Options; Quality Change; I/F Connection - Canon LBP3360 User Manual

QUALITY CHANGE

CONT.PRINTING*, STOP PRINTING
Specifies whether the printer should continue printing with the image quality level
being lowered automatically or stop printing, displaying the following error
message when the memory required for the process runs out.
Error Message
<38 LOW IMGE QLTY>
If CONT.PRINTING is specified, the printer prints with the image quality level
being lowered automatically without displaying a message.
If STOP PRINTING is specified, the printer stops printing, displaying a message.
In this case, the printer resumes printing with the image quality level being
lowered by pressing the
NOTE
When the message <38 LOW IMGE QLTY> appears frequently by specifying
STOP PRINTING for this item, perform the following procedure.
- If GRADATION LEVEL is set to HIGH, set it to STANDARD. If you do so, however,
the printer prints with the gradation level of the data being lowered.

INTERFACE MENU Options

I/F CONNECTION

USB ......................................ON*, OFF
NETWORK ...........................ON*, OFF
Specifies the settings for the interfaces used for communication with the
computer, etc.
You can specify ON or OFF for each interface.
Even if multiple interfaces are set to ON, the printer automatically switches to the
one that received the data first. Therefore, you do not need to change the setting
in the printer each time you connect the printer to different types of interfaces at
the same time.
IMPORTANT
After changing the settings for this item, cycle the power of the printer or perform a
hard reset to make the settings effective.
Setting
When the printer receives a large amount of data or
complicated data, the memory required for the
process may run out, and the printer may print with
the image quality level being lowered automatically.
Specify whether the printer should display an error
message when the printer is in this status.
(Online) key.
SETUP Menu Settings
6
6-25