Palm TREO 700W User Manual page 108

CHAPTER 5
Tip
Check your battery
level before
establishing a
Bluetooth connection.
If the battery level is
low, you can't make a
Bluetooth connection.
Tip
If you have trouble
receiving info over a
Bluetooth connection,
press Start and select
Settings. Select the
Connections tab, and
then select Beam.
Make sure the Receive
all incoming beams
box is checked.
100
Staying in Touch
You can now communicate with this device whenever it is within range
(about 30 feet) and your smartphone's Bluetooth feature is turned on
(see steps 1 and 2 earlier in this section).
Sending information over a Bluetooth connection
You can send an individual entry or file.
1. Make sure the receiving device is ready to receive a Bluetooth
connection.
2. Highlight the entry or file you want to send.
3. Press Menu
names based on the type of item you highlighted).
4. Select the receiving device in the list.
When the transmission is complete, "Done" appears next to the name
of the receiving device.
Receiving information over a Bluetooth connection
1. Go to your Today screen, and then tap Bluetooth
2. Check the Turn on Bluetooth box to turn on your smartphone's
Bluetooth feature.
3. If you already set up a connection with the transmitting device, your
smartphone is ready to receive the info. If you haven't set up a
connection, check the Make this device discoverable to other
devices box to let the device find your smartphone and request a
connection.
4. When your smartphone is receiving info, a notification tells you that
a transmission is in progress. To stop the transmission, press
Cancel ; to close the notification, press Dismiss
and select Beam... (the menu item changes
Using Your Treo 700w Smartphone
.
.