Connector - Polycom 7000 Integration Manual

Integration Guide for the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System or Polycom RealPresence Group
System in Unsupported VoIP Environments
12
To connect a mobile device to the phone, you require the optional Mobile
Device Cable. To connect a computer calling application to the phone, you
require the optional Computer Calling Cable.
Connecting Mobile or Computer Audio to the 2.5mm Audio Connector
The phone has a 2.5mm audio connector to connect to a mobile device or to a
computer calling application. You connect a mobile device so you can use the
conference phone speaker to hear mobile device calls. You connect a computer
to stream two-way audio from computer calling applications for hands-free
conversations. The 2.5mm audio connector is located on the right side of the
conference phone, behind a door you flip open.
The following figure shows the 2.5mm audio connector behind the door on the
side of the conference phone. The 2.5mm audio connector has a mobile phone
icon above it.
To connect audio from a mobile device:
Connect one end of the optional Mobile Device Cable to the headset jack
>>
on a mobile device, and connect the other end to the 2.5mm audio
connector on the conference phone.
For information on using the conference phone with a mobile device
connection, refer to the section "Using Computer or Mobile Audio with the
Conference Phone" in the User Guide for the Polycom SoundStation IP 7000
Phone.