Table of Contents
Advertisement
- MultiFrame function in Random Trigger Shutter mode (TriggerMode = On, TriggerSequence = 0 or 1)
Camera transfers "AcquisitionFrameCount" frame(s). It
- Bulk function (TriggerMode = On, TriggerSequence = 6)
Camera transfers "TriggerAdditionalParameter" frame(s)
AcquisitionMode = Continuous
TriggerMode = On
TriggerSequence = 6
TriggerAdditionalParameter = 3
Start
Acquisition
Command
The trigger can be input in arbitrary timing.
Trigger
VD
Exposure
Frame 1
*Exposure overlaps sensor readout.
*Exposure time is determined by ExposureTime setting.
USB Bus
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
AcquisitionFrameRate
Frame 2
TriggerAdditionalParameter
Frame 1
Frame 2
requires
"AcquisitionFrameCount" time(s)
by a single trigger.
Frame 3
Frame 3
62 / 65
Stop
Start
Counter is reset.
Frame 1
Stream
stops
www.toshiba-teli.co.jp
of trigger.
Frame 1
D4223121B
Advertisement
Table of Contents
