Table of Contents
Advertisement
● Setting
- Select an image format.
Select "Fomat2" of "ImageFormatSelector" register.
- Set Decimation lines
Set the following value to "DecimationVertical" registers. Setting value is Integer type.
"DecimationVertical" is the number of line(s) to skip.
● Note
Decimation function is disabled when the camera is running in Scalable mode.
Scalable function is disabled when the camera is running in Decimation mode.
Changing "DecimationVertical" register value is invalid during image stream data output.
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Model
BU406M
Minimum (*)
1
Value
1,2,4,8
Maximum
8
57 / 65
* initial factory setting
www.toshiba-teli.co.jp
D4223121B
Advertisement
Table of Contents
