Table of Contents
Advertisement
● In Random Trigger Shutter mode
* T1 is the same value as the normal shutter mode.
* T3 and T4 are typical value.
Notes of random trigger shutter mode:
- In the period when FRAME_TRIGGER_WAIT (GPIO signal) is inactive, user must not input external trigger signal to
this camera.
-
When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility
of causing the malfunction. In this case, please input a proper trigger signal.
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Edge mode (Image format: Mono 8, all pixels readout)
Level mode (Image format: Mono 8, all pixels readout)
Model
BU406M
T3 [µs]
T4 [µs]
0.4
0.4
23 / 65
D4223121B
www.toshiba-teli.co.jp
Advertisement
Table of Contents
