Timercontrol - Toshiba BU406M Instruction Manual

Bu series cmos camera
Hide thumbs Also See for BU406M:
Table of Contents

Advertisement

TimerControl

This section describes TimerControl category.
This camera is able to generate Timer0Active pulse, derived from several signal sources. This pulse can be
used as strobe control signal.
● Registers
Register
Visibility
TimerSelector
Beginner
TimerDuration
Beginner
TimerDelay
Beginner
TimerTriggerSource
Beginner
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Fig. Timer0Active
Access
R
Returns the selected timer name.
R/W
Sets the width of Timer0Active pulse.
R/W
Sets the delay of Timer0Active pulse.
R/W
Selects the source of Timer0Active pulse to start.
51 / 65
Description
www.toshiba-teli.co.jp
D4223121B

Advertisement

Table of Contents
loading

Table of Contents