THOMSON SpeedTouch 510 Setup And User Manual page 58

3 SpeedTouch™ Web Interface
DNS
56
•
Click the DHCP Relay tab to view the DHCP relay pages.
• Click the Relay Config tab to view the current SpeedTouch™ DHCP relay
status:
Via this table you can also manually add static SpeedTouch™ DHCP relay
entries for specific interfaces, if applicable.
• Click the Relay Interfaces tab to view the SpeedTouch™ DHCP relay inter-
faces:
•
Click the DHCP Client tab to view the current SpeedTouch™ DHCP client status:
You can also manually add static SpeedTouch™ DHCP client entries for specific
interfaces, via this table or by using the IP address table.
C
lick this link to display the Dynamic Name System (DNS) page.
This page allows you to:
•
View the current SpeedTouch™ DNS server hostname leases:
Via this table you can also add static DNS hostname entries.
This may be useful for devices which do not support DNS, e.g. a printer. By adding
a name for your network printer, identified by its IP address, you will be able to
contact this printer by name rather than by IP address.
•
View and/or supply the SpeedTouch™ DNS domain name and to enable/disable
the SpeedTouch™ DNS server:
The use of DNS subdomains is supported, e.g. dsl.office.lan.
Note
E-SIT-CTC-20030306-0003 v3.0