Configuration Setup For Other Operating Systems - THOMSON SpeedTouch 510 Setup And User Manual

1 SpeedTouch™ Installation
1.3.2 Configuration Setup for other Operating
Supported Systems
TCP/IP
Procedure
26
Systems
As the SpeedTouch™ is OS-independent, this configuration setup can be used by any
computer system.
The following procedure may equally be used on MS Windows OSs.
Note
Ensure that your operating system has a valid TCP/IP configuration.
Configure your computer with a static Net10 private IP address, e.g. 10.0.0.1. Ensure,
however, that you do NOT use the 10.0.0.138 IP address as this is the default IP address
of the SpeedTouch™.
To ensure that IP connectivity exists, you can ping the SpeedTouch™.
The configuration setup proceeds as follows:
To ensure that the SpeedTouch™ is in its factory default state, reset the Speed-
1
Touch™ to the default configuration. See
Open a web browser and browse to the SpeedTouch™'s default IP address
2
10.0.0.138. See "3 SpeedTouch™ Web Interface" on page 43
tion.
As a result the SpeedTouch™ System Info web page appears.
3
Expand the Advanced Topics and click
If the SpeedTouch™ is in factory defaults, the Easy Setup wizard will appear
Note
automatically.
The Welcome to the SpeedTouch™ Setup Wizard window appears:
4
Click to continue.
Next
"5 Troubleshooting" on page
for more informa-
Easy Setup.
E-SIT-CTC-20030306-0003 v3.0
69.