Assembling And Hanging The Fan - Hunter Ceiling fan Owner's Manual And Installation Manual

Note: Your Hunter fan comes with an optional downrod extension Note: Your Hunter fan comes with an optional downrod extension
pipe. If you are hanging the fan on a ceiling higher than 10 feet tall pipe. If you are hanging the fan on a ceiling higher than 10 feet tall
and you would like to use the enclosed optional downrod, follow and you would like to use the enclosed optional downrod, follow
steps 3-5 steps 3-5 3-9 on the next page. 3-9 on the next page.
– –
3-1. 3-1. Unbundle the wires from the fan. Unbundle the wires from the fan.
WARNING: Fan may fall if not assembled as directed in these WARNING: Fan may fall if not assembled as directed in these
installation instructions. installation instructions.
For Standard or Angled mounting: For Standard or Angled mounting:
3-2. Insert the downrod through the canopy and canopy trim ring. 3-2. Insert the downrod through the canopy and canopy trim ring.
Feed the wires from the fan through the downrod. Feed the wires from the fan through the downrod.
3-3. Using the provided Allen wrench, loosen the setscrew on the 3-3. Using the provided Allen wrench, loosen the setscrew on the
adapter to install the pipe and ball assembly. Note: When the adapter to install the pipe and ball assembly. Note: When the
pipe and ball assembly is fully installed, 2-3 threads on the pipe pipe and ball assembly is fully installed, 2-3 threads on the pipe
will still be visible; this is normal. Use the Allen wrench to securely will still be visible; this is normal. Use the Allen wrench to securely
retighten the setscrew. retighten the setscrew.
CAUTION: The adapter has a special coating on the threads. Do CAUTION: The adapter has a special coating on the threads. Do
not remove this coating; the coating prevents the downrod from not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod. unscrewing. Once assembled, do not remove the downrod.
3-4. Raise the fan and place the hook on the ceiling plate through the 3-4. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim. U-shaped hole in the rim.
3 • Assembling and Hanging the Fan
Allen Wrench Allen Wrench
6
42790-01 • 20080925 • Hunter Fan Company
Downrod
Canopy Canopy Canopy
Canopy
Trim Ring
Setscrew Setscrew
Step 3-4 Step 3-4
U-shaped U-shaped
Hole Hole