Problems During Printing - Xerox 6279 User Manual

Symptoms
The scanned image has
shadows.
The scanned image is coarse.
Original often jams.

Problems During Printing

The following table will help solve problems encountered during printing.
® ®
Xerox 6279 Wide Format Solution
Copy/Scan User Guide
Remedy
Adjust the scan Density and Original Type settings.
• Select the correct Rendering setting.
• Correctly adjust the thickness lever on the scanner.
• Check if the original has folds or is curled. If so, flatten out the
original and rescan.
• Check if the original has shiny tape at the lead edge. If so,
reorient the original and rescan.
• Check if the lead edge of the original is damaged. If so, reorient
the original and rescan.
• Make sure the original is the right size. The minimum size
original that can be fed is 6.9 inches wide x 8.3 inch length
(176 x 200mm).
Problem Solving
8-7