Creating A New Color Calibration - Xerox 6279 User Manual

In the calibration process, targets are printed and scanned for multiple quality levels
and then stored as profiles sets that can be reused. Profile sets should be logically named
when created so that switching among previously created profile sets is easy. For example,
when changing media type from Bond to Glossy, a user can then identify and select a
Bond or Glossy set that was previously created.
The System Administrator is required to create, rename and delete color profiles. But
you do not have to be a System Administrator to use Color Calibration.
Note that any change to the Scanner, Printer or printer Media Type is reason to recreate
a new color calibration profile. The System Administrator will want to create new profile
sets for a newly networked printer.
NOTE
Before getting started, ensure that the desired remote color printer is set up in the
Web Printer Management Tool. Currently, the Web Printer Management Tool is the
only way to set up a remote printer. Contact your System Administrator for this if
required.
NOTE
Refer to the Maintenance chapter for cleaning the scanner prior to scanning the
Color Calibration targets. Cleaning the five Contact Image Sensors and the Document
Feed Rollers ensures improved image quality if it has been some time since it was
last done. Ensure the areas are fully dry before scanning your originals.

Creating a new Color Calibration

1. Select Scan to Remote Printer from the Services menu.
2. Select Destination.
The Select a Destination Remote Printer screen displays.
3. Select your destination color printer.
4. Select Color Calibration.
5. Select Create.
The Enter a Profile Set Name screen displays.
NOTE
When you select the Create button in the step above, if there had been a
previously started calibration session that was incomplete or not saved, you
have the option to resume where you left off or start fresh with creating a new
calibration. The Current Color Calibration Session screen displays with these
choices. Be advised that if you select the Create button, the calibration previously
started is deleted.
® ®
Xerox 6279 Wide Format Solution
Copy/Scan User Guide
Scanning Documents
3-35