System Administrator; Job Accounting - Xerox 6279 User Manual

System Administration

System Administrator

The System Administrator Log In feature allows the administrator to log in and out of
the administrator account with a password. If the user has logged in as the administrator,
the account indicator in the upper right corner of the screen displays Administrator. If
not logged in, the indicator displays Guest.

Job Accounting

The Job Accounting feature either states that accounting is not enabled or allows the
user to enter a user ID and account ID to log in. A user who is already logged in is allowed
to log out. Once the user is logged in, the account indicator at the top right corner of
the User Interface displays the first 16 characters of the user ID and account ID.
NOTE
You can also get to the Log In/Out menu by pressing the user level indicator in
the upper right corner of the screen.
NOTE
You can be logged in as an administrator and as a Job Accounting user at the
same time. You are prompted to enter your login information when accessing
the appropriate features.
NOTE
For more detailed information about logging into Job Accounting mode, see the
Job Accounting Overview section of this chapter.
To enter the System Administrator Mode:
1. Select System Administrator Log In.
The Enter SA Password screen displays.
2. Enter the System Administration password on the Numeric Keypad.
3. Select Enter.
Once you are logged in as an Administrator, the system displays the Administrator icon
in the upper right corner of the screen.
If there is no system activity for a period of time specified in the Timers setup (scanning
documents, screen touches, or key presses), a timeout screen displays for four seconds,
and the user is logged out automatically.
For more detailed information about timers setup, see the Configure Timers section of
this chapter.
5-4 ® ®
Xerox 6279 Wide Format Solution
Copy/Scan User Guide