System Utility - Planet WNAP-1120 User Manual

Parameter
MAC Address Filtering Table
Enable Wireless Access Control
Add MAC address into the table
Remove MAC address from the table If you want to remove a MAC address from the "MAC Address
Reset
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are saving successfully. You may press "Continue" for
configure other settings or "Apply" to restart 11N AP with new configuration.
3.8

System Utility

In this page, you can define the Access Point's IP Address, Login Password and enable the
DHCP Server feature.
Description
This table records the MAC addresses of wireless stations you
allow to access your network. The "Comment" field is the
description of the wireless station and is helpful for you to
recognize the wireless station.
Enable or disable the MAC Address Filtering function.
In the bottom "New" area, fill in the "MAC Address" and
"Comment" of the wireless station, and then click "Add". This
wireless station will be added into the "MAC Address Filtering
Table" above.
Filtering Table", select the MAC address in the table and then
click "Delete Selected". If you want to remove all MAC
addresses from the table, just click "Delete All" button.
Click "Reset" will clear your current selections.
38