Planet WNAP-1120 User Manual page 23

Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
Associated Clients You may press "Show Active Clients" button to check the connected client
information. After the button pressed, you will see the dialog box as below.
You may press "Refresh" to get the new client table or "Close" to close this dialog
box.
WLAN MAC Keep default setting: 11N AP will use its own MAC address to access the wireless
LAN.
Press "MAC Clone" button: It will use PC's MAC address to access the wireless
LAN.
In "Universal Repeater mode", this device can act as a station to connect to
Root AP SSID
a Root AP. You should enter the SSID of the Root AP here.
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are saving successfully. You may press "Continue" for
configure other settings or "Apply" to restart 11N AP with new configuration.
23