Planet WNAP-1120 User Manual page 21

2.4GHz (B+G): It allows the 11N AP to operate in 802.11b and 802.11g
simultaneously.
2.4GHz (B+G+N): It allows the 11N AP to operate in 802.11b, 802.11g, and
802.11n simultaneously.
ESSID The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLANs.
Please make sure that the ESSID of all stations in the same WLAN network are the
same. The default value is "default".
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
Associated Clients You may press "Show Active Clients" button to check the connected client
information. After the button pressed, you will see the dialog box as below:
You may press "Refresh" to get the new client table or "Close" to close this dialog
box.
MAC Address 1 ~4 If you want to bridge multiple 11N AP in this mode, you have to enter the MAC
addresses of other 11N AP into the fields.
Set Security IF you want to enable security to protect your wireless connection. Please press
"Set Security" button and refer to section "3.2.7 Security setting for bridge mode" to
configure the detail settings.
21