Planet WNAP-1110 Quick Manual

VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package should contain the items plus WNAP-1110. If any item is missing or damaged, please contact the seller immediately
Quick Installation Guide
NOTE :
1. If any of the above items are missing or damaged, contact your local dealer for support.
2. In the following information, WNAP-1110 is referred as "11n AP" unless otherwise specified.
Step 1 : Physical Installing
1. Please Connect bundled antenna to the SMA connector.
2. Please Connect the LAN PC or network devices to 11n AP LAN port with RJ-45 Ethernet cable.
3. Please Connect power adapter to the power socket on 11n AP, and plug the other end of the power pack into an electrical outlet.
NOTE : ONLY use the power adapter supplied with 11n AP. Otherwise, the product may be damaged.
4. After the hardware connection is done, please refer to below instructions for the configuration.
Quick Guide
CD-ROM
POWER
9VDC Power Socket LAN Port
POWER
POWER
Antenna Power Adapter
RESET
Reset SMA Connector
RESET
RESET
WNAP-1110