Planet WNAP-1120 User Manual page 27

PBC setup step:
1. Ensure you have set the security setting on the 11N AP (as Registrar).
2. Click the WPS button on 11N AP (or the "Start PBC" button on the web interface of 11N AP) and the
other device (supports PBC function) in 2 minutes.
3. 11N AP (Registrar) would send SSID and security key to the other device (Enrollee) through tunnel to
connect.
4. If you see the wireless client in the list, WPS-PBC setting is successful.
PIN (as Registrar) setup step:
1. Select Config Mode: "Registrar" on 11N AP.
2. Fill the PIN code of the other device (as Enrollee that support WPS-PIN setting) into the "configure via
Client Pin code" of 11N AP.
3. Click the PIN buttons on 11N AP and the other device in 2 minutes.
4. If you see the wireless client in the list, WPS-PIN setting is successful.
27