Ap Bridge - Wds Mode - Planet WNAP-1120 User Manual

Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
MAC Address 1~4 If you want to bridge multiple 11N AP in this mode, you have to enter the MAC
addresses of other 11N AP into the fields.
Set Security IF you want to enable security to protect your wireless connection. Please press
"Set Security" button and refer to section "3.2.8 Security setting for bridge mode" to
configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will see
a screen to prompt you the settings are saving successfully. You may press "Continue" for configure
other settings or "Apply" to restart the 11N AP with new configuration.
3.2.5

AP Bridge - WDS Mode

If you want 11N AP to bridge to other 11N AP and provide access for other wireless clients at
the same time, you have to set the 11N AP to "AP Bridge - WDS". Simply speaking, "AP Bridge
- WDS" function is the combination of "AP mode" and "AP Bridge-Point to Multi-Point mode".
Parameter Description
Mode Shows the current operation mode.
Band 2.4GHz (B): It forces the 11N AP to operate in 802.11b only.
2.4GHz (G): It forces the 11N AP to operate in 802.11g only.
2.4GHz (N): It forces the 11N AP to operate in 802.11n only.
20