Help - BT PARAGON 400 User Manual

Help

The emergency services can be contacted in the
UK by dialling or
999 112
country that is a member of the European
community.
Check that your machine is connected to the
phone socket.
Check that your machine is correctly connected
to the mains power and that the power is
switched on.
Check that the mains power cable is plugged in
to the back of the machine.
Speak clearly – within 20cm of the microphone –
when recording your message.
Check that your machine is set to ANSWER ON
and that the recording capacity is not full.
The caller may be speaking too quietly or has a
bad connection.
Make sure the phone you are calling from has a
keypad.
TouchTone TM
which is valid in any
When entering your security PIN, allow enough
time - at least 2 seconds between each digit for
your Paragon 400 to recognise each one.
If your Paragon 400 will not respond to any
button presses, remove the back-up battery and
turn off the power for 10 seconds. Turning the
power back on will reset your machine to
ANSWER ON mode. However, please note that
during resetting, all messages will be lost.
If you still have problems with your
Paragon 400, call the Paragon Helpline on
-call 0845 .
23