Help - BT Sonus 1500 Quick Setup And User Manual

Help

Phone doesn't work
• Have you activated the batteries correctly? See page 5.
• Check that the mains power is correctly connected.
no dial tone
• Is the telephone cord of the base plugged into the phone socket?
• Check that the mains power is correctly connected.
• Only use the telephone cord supplied with the phone.
Can't make or receive calls
• Check that the mains power is correctly connected.
• The batteries may need recharging.
• Has there been a power cut? If so, place the handset back on the base for ten
seconds and try again. If it still doesn't work, disconnect the batteries and mains
power for ten minutes, then reconnect and try again.
You have a dial tone, but the phone won't dial out
• If you're connected to a switchboard, check whether you need to dial an
access code, see page 40.
Handset doesn't ring
• The ringer volume may be switched off, see page 24.
• Check that the mains power is correctly connected.
• Make sure the handset is registered to the base, see page 60.
If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp
63