BT PARAGON 400 User Manual page 22

Incoming calls will be answered as
normal if the caller does not know the
VIP code and a message can be left.
If the caller is a VIP they enter the
code during the outgoing message
playback or the incoming message
record period (the caller can also leave
an incoming message and then enter
the VIP code). When the last digit is
entered, a 30 second counter starts and
the VIP tone alerts the user.
When the Paragon 400 recognises the
VIP code has been entered it stops
recording, and the message is
discarded. Any valid message left after
entering the VIP code is retained.
You can switch on your answering machine from
another phone and, providing you are using a
TouchTone T M keypad, play back your messages
and memos.
To help keep your messages private, your
Paragon 400 requires you to enter a 4-digit PIN.
The pre-set code is 0000.
Press until the display shows
Menu
SECURITY CODE.
The prompt says "Please enter your
Dial /OK
4 digit security code" and displays the
current PIN.
Enter the 4-digit PIN you want.
To change any of the numbers.
Del
To confirm the PIN displayed.
Dial /OK
When calling your Paragon 400 from another
phone, it allows two attempts to enter the
correct PIN. If this is not done, you hear the
message "Thank you for calling" and the
machine hangs up.
If you have forgotten to switch on your
answering machine
Ring your answering machine from
another phone
After 20 rings, your Paragon 400 will
automatically answer the call.
Your answering machine is now
switched on.
19